Cable Harnesses
Wiring
up a multi axis driver assembly can be very time consuming. To speed
up the process we offer single, four and five axis cable assemblies in
various lengths that simplify the process.
Heat Sinks
Heat sinks are available for
GenY32 and MK4c systems (4-axis) and 4 or 5 axis heat sinks for the MM166
driver. These heat sinks are available with or without fans.
Joysticks
Two different joysticks are available - CJ34b (smart) and CJ14 (not smart). The Smart Joystick connects
to the Smart controllers like GenY32 via a USART while the CJ14 outputs an analog signal.
Most Smart controller have an RJ11 connector. The connector is a USART port that allows a CJ34b to be connected using standard Telco wire.
Displays
The SmartLCD is a small 12x4
display with or without a rotary attachment that connects to the control via
I2C. Each of the smart controllers enumerates all attached devices so
if a SmartLCD is attached it will be detected and integrated automatically.
Sensors
A mix of rotary and linear sensors are available.
The smart controllers such as GenY32 or GenZ automatically enumerate
attached sensors and integrate them into the operation of the system. See the Sensor section of the web site
for more information.
 
|
